Brewing With A Reusable Filter Cup - Cuisinart Thermal Coffee Center SS-20 Series Instruction Booklet

7.
Press the desired brew button (6, 8, or 10
oz.). The beverage will start to dispense
momentarily. Selected brew button will flash
slowly while brewing.
NOTE: To cancel brewing, simply press the
selected brew size once again and the brewing
process will be stopped.
Caution: There is very hot water in the
capsule chamber during the brewing
process. To avoid risk of injury, do not lift the
handle or open the capsule chamber during
the brewing process
8.
Once fully dispensed, all lights will illuminate.
Lift the handle, then remove and dispose of
the used capsule. Close the brew head.
Caution: Capsule will be hot.
9.
Enjoy your cup of coffee! Your brewer is
ready to use again.
NOTE: When Add Water light illuminates,
no brewing can be done. Once you refill the
reservoir, your unit is ready to brew.
ADD WATER
The Add Water light will illuminate when water
is below 10.5 ounces. Simply fill the reservoir
with water and continue to brew as usual.
.
BREWING WITH
THE HOMEBARISTA
REUSABLE FILTER CUP
The Single-Serve Coffeemaker can be used
with a reusable coffee capsule, which allows
you to use your own ground coffee.
Try the Cuisinart
®
Filter Cup included with your brewer for your
favorite coffee or tea.
1. Fill the filter basket within the reusable
capsule with ground coffee, making sure not
to fill past the max indicator. Adjust the
amount to your personal preference. Do not
tamp the grounds. Make sure there are no
grounds remaining on the upper rim of the
filter basket. Close lid.
Note: Max fill: 2.5 scoops or 15 grams.
2. Remove the capsule holder from the brewing
chamber by pulling toward you.
2a. Drop the reusable coffee capsule into
the brewing chamber. There is no need
to snap it into place.
12
®
HomeBarista Reusable
®