Page 1
INSTRUCTION BOOKLET Compact Single-Serve Coffeemaker SS-6C For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
Page 2
SAVE THESE Return appliance to the nearest Cuisinart Repair Center for examination, repair, INSTRUCTIONS or electrical or mechanical adjustment. 7. The use of accessory attachments not...
NOTICE CAUTION: Before using an adapter, it must be Circuit Grounding determined that the outlet cover plate screw If you have a Conductor is properly grounded. If in doubt, consult a Connected diecast metal unit, licensed electrician. Never use an adapter Properly for your protection unless you are sure it is properly grounded.
Element 4 PROPORTION No matter which cup size you choose, the Cuisinart ® Compact Single-Serve Brewer, working in conjunction with a single-serve capsule, will always produce the perfect cup every time.
Buttons and Indicators Setting Up Your Brewer Power Button Initial Cleaning Press to turn the brewer on and off. Perform an initial cleaning before making your first beverage. Follow these instructions, without inserting a capsule. 1. Remove water reservoir from the unit. 2.
3. Place the charcoal water filter in the Replacement filters can be purchased in holder and snap the holder cover stores, or by calling Cuisinart Consumer closed. Be careful – improper placement Service, or at www.cuisinart.ca can tear the filter skin (see figure below).
Brewing 8. Press the desired brew button (6, 8, or 10 oz.). The beverage will start 1. Remove water reservoir to fill. to dispense momentarily. Selected brew button will flash while brewing. Note: To cancel brewing, simply press the selected brew size once again and the brewing process will be stopped.
Brewing with a Reusable Coffee Capsule The Cuisinart Compact Single-Serve ® Brewer can be used with a reusable coffee capsule (not included), which allows you to use your own ground coffee. (MAX 2.5 scoops or 16 g.) 2a. Drop the reusable coffee capsule into the brewing chamber.
Cleaning and Note: The funnel may be tight the first few times you go to remove it, this is normal and Maintenance will loosen with continued use. Cleaning External Parts Cleaning the Exit Needle – The exit We recommend regular cleaning of needle is located on the inside bottom the brewer’s external components.
De-Scaling Your Brewer Step 2: Fresh Water Rinse Mineral content in water varies from place • Repeat Step 1 three times, using fresh water in place of vinegar. to place. Depending on the mineral content • This will clean the brewer plumbing and of the water in your area, calcium deposits remove any residual vinegar taste.
Chlorine or mineral Consider using bottled water, filtered water or replacing the taste in coffee . Cuisinart Charcoal Water Filter . Brewer doesn’t brew a Turn off and unplug the brewer for 30 seconds or more . full cup .
LIMITED Service Centre: THREE-YEAR WARRANTY Toll-free phone number: 1-800-472-7606 We warrant that this Cuisinart product will be free of defects in materials or workmanship Address: under normal home use for 3 years from the Cuisinart Canada date of original purchase. This warranty covers 100 Conair Parkway manufacturer’s defects including mechanical...
Need help?
Do you have a question about the SS-6C and is the answer not in the manual?
Questions and answers