Using The Single-Serve Coffeemaker; Brewing With A Reusable Filter Cup - Cuisinart Coffee Center Brew Basics SS-12 Instruction Booklet

Table of Contents

Advertisement

Available languages

Available languages

USING THE SINGLE-
SERVE COFFEEMAKER
Follow instructions in Setting Up Your Single-Serve
Coffeemaker above.
BREWING
1. Add water into the 40-ounce water reservoir.
2. If not already turned on, press the ON/OFF button
on the control panel.
3. Place mug on the drip tray. The drip tray can be
removed to accommodate travel mugs.
4. Select a capsule.
NOTE: Do not remove the foil lid or puncture
the capsule.
5. Open the brew head and place a capsule in the
brewing chamber. Close brew head.
Caution: There are two sharp needles in the
brewing chamber that puncture the capsule,
one above and one below. To avoid risk of
injury, do not put your fi ngers in the capsule
brewing chamber.
6. To select brew size, press the POD SIZE button
once, and the LCD display should show the default
setting of 10 oz. Press the POD SIZE button until
desired cup size is displayed on the LCD display
(8, 10, or 12 oz).
7. When ready to brew, press POD BREW and the
machine will begin brewing. The white light
surrounding POD BREW button will fl ash.
Caution: There is very hot water in the capsule
chamber during the brewing process. To avoid
risk of injury, do not lift the handle or open the
capsule chamber during the brewing process.
8. Once fully dispensed, all lights will illuminate except
POD SIZE. Lift the handle, then remove and dispose
of the used capsule. Close the brew head.
Caution: Capsule will be hot.
9. Enjoy your cup of coffee! Your brewer is ready
to use again.
10. To brew another cup, press POD BREW once and
the LCD display will show the last brewing size.
At this point, cup size can be changed by pressing
POD SIZE, or to simply repeat previous selection,
press POD BREW again.
NOTE: When Add Water indicator (water drop icon
on LCD screen) illuminates, no brewing can be done.
Once you refill the reservoir, your unit is ready
to brew.
ADD WATER
A water drop icon will illuminate on the LCD display
when there is insufficient water (less than 13.5 oz) in the
Single Serve water reservoir. Add water for the coffee
maker to brew single-serve cups.
BREWING WITH THE
HOMEBARISTA
FILTER CUP
The Single-Serve Coffeemaker can be used with a
reusable coffee capsule, which allows you to use your
own ground coffee.
The HomeBarista™ Reusable Filter Cup is not
included, but is for sale at most retailers with
Cuisinart products.
1. Fill the fi lter basket within the reusable capsule with
ground coffee, making sure not to fi ll past the max
indicator. Adjust the amount to your personal prefer-
ence. Do not tamp the grounds. Make sure there are
no grounds remaining on the upper rim of the fi lter
basket. Close lid.
NOTE: Max fi ll: 2.5 scoops or 15 grams.
2. Remove the capsule holder from the brewing
chamber by pulling toward you.
11
REUSABLE

Advertisement

Chapters

Table of Contents
loading

Table of Contents