Sharp EL-738F Operation Manual page 67

• You can enter a total of up to 100 statistical and/or cash fl ow
data items. For single-variable data, a data set without a
frequency is counted as one data item, and a data set with
an assigned frequency is counted as two data items. For two-
variable data, a data set without a frequency is counted as
two data items, while a data set with an assigned frequency is
counted as three data items.
• If you wish to correct a value before pressing J , press
L or s to delete the entry, then enter the correct value.
Entering statistical data
Enter the data in the table to the right using
the "Stat 0" sub-mode.
Procedure
Enter the "Stat 0" sub-
mode.
Enter statistical data.
Return to the "Stat 0"
display.
1 If there is data stored in memory, press . b (within
*
STAT mode) to clear it.
2 The format of the data set (the sample and frequency values)
*
number, which is initially set to "1.00", is dependent on calcu-
lator notation settings.
Key operation
s m 1 0
30 J
1
*
40 > 2 J
50 J
s
65
DATA
30
40
40
50
Display
Stat —
000
DATA SET=
100
DATA SET=
200
DATA SET=
300
Stat —
000
2
*