Nevir NVR-4005 Instruction Manual page 17

8. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the place of purchase for a replacement or repair free of charge.
9. The use of attachments not recommended or sold by the appliance
manufacturer may cause fire, electric shock or injury.
10. Do not use the appliance outdoors.
11. Do not let cord hang over edge of table or counter or touch hot surface.
12. Blade is sharp. Hold only by blade lock. Handle carefully when cleaning.Do not
use the appliance for other than its intended use.
PREPARING TO SLICE
1. Unwrap cord from bottom of slicer, and slide into slot. Position slicer on a clean,
dry and smooth surface.
2. Move the sliding feed table back and forth a few time to make sure movement.
3. Place the piece holder on back of the sliding feed table.
4. Select the required slice thickness by turning thickness adjusting knob,
clockwise for thinner slice and counter-clockwise for thicker slice. The range of
thickness adjusting is from 0 to 15mm.
17