Advertisement
3
When you reach the Camera / Channel Settings screen, you will want
to have installed the cameras in their final position. Please make sure
you have mounted cameras at least 7ft. above the ground and angled
them slightly down.
At this stage of the Startup Wizard, you will be instructed on adjusting
the camera sensitivity and setting the Motion Detection Area. Having
your cameras in their final position will be key.
To detect motion for the front door to your home, place the camera to
the side of the entrance.
4
This is the last screen you will
see when you have successfully
completed the Startup Wizard.
NOTE:
Need more help configuring your DVR? Please refer to the owner's manual located
on the support page at www.NightOwlSP.com.
NOTE:
If your camera
has an infrared sensor,
it works best for 'side to
side' movement across
the camera's field of
view as opposed to
directly to or away from
the camera.
6
Advertisement
