Advertisement
FROM Camera
NOTE:
Audio enabled cameras will have
a white RCA connector to transmit audio
signal (Optional).
Connect the ends of the cable
6
attached to the camera to the
ends of a video/power cable
labeled TO CAMERA ONLY.
Power Cable
Connectors
Connect the red female power
8
leads of the video/power cables
to the male power splitter ends.
Connect the DVR power adapter
10
to the Power Input on the rear
of the DVR.
TO Camera
Power Splitter
Connectors
NOTE:
Make sure you twist and lock BNC connectors.
Connect the BNC connector of the
7
video/power cable labeled TO DVR
ONLY to an open video input on
the DVR.
Camera Power
Power
Splitter
NOTE:
Power adapters are labeled TO CAMERA
ONLY and TO DVR ONLY.
Connect the power splitter to the
9
camera power adapter and plug the
adapter into a surge protector or
Uninterruptible Power Supply (UPS).
(Surge
Protector not
included)
NOTE:
Some systems will beep upon booting up.
Plug the DVR power adapter into a
11
surge protector or Uninterruptible
Power Supply (UPS).
NOTE:
Check that the UPS or surge protector
is switched ON.
Adapter
(Surge
Protector Not
Included)
4
Advertisement
