Table of Contents
Advertisement
Quick Links
ELECTRIC
BLOWER
1800W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor:
1800 Watt
Input:
230–240V~50Hz
No Load Speed:
15,000/min
Max. Air Volume: 350m
3
/hour
Max. Air Speed:
320km/hour
Noise Level:
100dB
Weight:
2.8kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: blower tube,
carbon brushes.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WHAT'S IN THE BOX
Blower
Blow Tube
Direction Nozzle
Assembly Screws
LMBL-1018
0617
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ozito LMBL-1018
Summary of Contents for Ozito LMBL-1018
- Page 1 100dB Weight: 2.8kg ozito.com.au Assembly Screws LMBL-1018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition WARRANTY YOU MUST RETURN THE PRODUCT to other rights and remedies which are available to you at law.
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION ELECTRIC BLOWER 1. ASSEMBLY 1. Direction nozzle 5. Cord retaining hook 2. Blow tube 6. Air intake vent Connecting the blow tube and direction nozzle 3. Handle 7. Assembly screws 2 x 12mm WARNING! ALWAYS ENSURE THE BLOWER IS 4. -
Page 3: Operation
OPERATION 2. TRIGGER SWITCH Using the extension cord retaining hook WARNING! THE POWER SUPPLY FOR THIS PRODUCT SHOULD BE PROTECTED BY A The cord retaining hook is used to “anchor” an extension cord when it is RESIDUAL CURRENT DEVICE RATED AT 30mA OR LESS. connected to the power lead of the tool. -
Page 4: Using The Blower
Be careful where you point the jet of air as it can move heavy material NOTE: Ozito Industries will not be responsible for any damage or and cause injury or damage to injuries caused by the repair of the tool by an unauthorised person or by bystanders. -
Page 5: Spare Parts
Bunnings Warehouse. Volts Hertz For further information, or any parts not listed here, visit Alternating current Watts www.ozito.com.au or contact Ozito Customer Service: No load speed Decibel (noise) rating Australia 1800 069 486 /min Revolutions or Regulator compliance mark... -
Page 6: Electrical Safety
Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. - Page 7 25 liters Weight: 7.97kg ozito.com.au Handle Fasteners LMBL-1018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. WARRANTY YOU MUST RETURN THE PRODUCT...
- Page 8 KNOW YOUR PRODUCT SETUP & PREPARATION 1. ASSEMBLY ECOMOW ELECTRIC MOWER 1. Motor cover 7. Grass catcher flap 2. Lifting handle 8. Grass catcher WARNING!: ENSURE THE TOOL IS DISCONNECTED 3. Lower handle 9. Handle securing set FROM THE POWER SUPPLY BEFORE ASSEMBLY 4.
- Page 9 OPERATION 2. PREPARATION Securing the Power Cord to the Handles Using the Cord Retainer 1. Secure the power cord from the The cord retainer prevents the extension lead (not included) from being disconnected during use. Only use Heavy Duty extension lead switch housing to the mower using suitable for outdoor use with electric garden tools, no longer than 25 cable ties (supplied). meters. 1. M ake a loop with the extension lead (socket end of lead) through the loop and secure over the hook.
- Page 10 First disconnect the mower from the power supply and inspect blade for any obstructions. A wait of 10 minutes in cooling time, or longer depending on ambient temperature and the operation being performed, before switching On the mower and resuming normal operation. Do Not Overload the Mower Mowing long thick grass may cause the motor speed to drop; you will hear a change in the motor sound. If the motor speed drops you may overload your lawn mower, which may cause damage. When mowing in long thick grass first cut with the cutting height set in the highest position, this will help reduce the load. LMBL-1018...
- Page 11 Do not over tighten. Recycling packaging reduces the need for landfill and raw Ozito Industries will not be responsible for any damage or injuries materials. Reuse of recycled material decreases pollution in the caused by repair of the tool by an unauthorised person or mishandling environment. Please recycle packaging where facilities exist.
- Page 12 6. Do not pull lead around sharp objects. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New 7. Always switch off at the mains before disconnecting any plug, cord or extension lead. Zealand. 8. Never carry the product by the cord.
Need help?
Do you have a question about the LMBL-1018 and is the answer not in the manual?
Questions and answers