Raider Garden Tools RD-LGS02 User Manual page 21

7. Place the machine horizontally.
Attention! Periodically check the hydraulic oil level. Do not leave the machine without oil.
Attention! Never mix two types of oil.
• Always keep the power tool and the power cord clean (especially the ventilation openings)
• Do not attempt to clean the machine by inserting pointed objects into the ventilation openings.
• Unplug before cleaning
8 SAFETY INSTRUCTIONS
When using electric tools, the following basic safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
Read all these instructions before attempting to operate this product. Save these instructions.
1. Check voltage indicated on nameplate;
2. Keep work area clean
Cluttered areas and benches invite injuries;
3. Consider work area environment
Do not expose power tools to rain.
Do not use power tools in damp or wet locations. Keep work area well lit. Do not use power tools in
presence of flammable liquids or gasses;
4. Guard against electric shock
Avoid body contact with earthed surfaces (e.g. pipes, radiators, ranges, refrigerators);
5. Keep children away
Do not let visitors contact tool or cord; they should be kept away from work area;
6. Store idle tools
When not in use, tools should be stored in a dry and locked-up place, out of reach of children;
7. Do not force the tool
It will do the job better and safer at the rate for which it was intended;
8. Use the right tool
Do not force small tools or attachments to do the job of a heavy-duty tool. Do not use tools for
purposes not intended (e.g. do not use a circular saw for cutting tree limbs or logs);
9. Dress properly
Do not wear loose clothing or jewelry; they can be caught in moving parts. Rubber gloves and non-
skid footwear are recommended when working outdoors. Wear protective hair covering to contain
long hair;
10. Use safety glasses
Also use face or dust mask, if cutting operation is dusty;
11. Connect dust extraction equipment
If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used;
12. Do not abuse the cord
Never carry the tool by the cord, never yank the cord to disconnect it from the socket, and keep the
cord away from heat, oil and sharp edges;
13. Secure work
Use clamps or a vise to hold the work; it is safer than using your hand and it frees both hands to
operate the tool;
14. Do not overreach
Keep proper footing and balance at all times;
15. Maintain tools with care
Keep tools sharp and clean for better and safer performance. Follow instructions for maintenance
and changing accessories. Inspect tool cords and plugs periodically and, if damaged, have them
repaired by a qualified person. Inspect extension cords periodically and replace them, if damaged.
Keep handles dry, clean and free from oil and grease;
16. Disconnect tools
Disconnect tool when not in use, before servicing, or when changing
21