Raider Garden Tools RD-LGS02 User Manual page 20

20 www.raider.bg
6. NESTING OF LOGS
1. Release both buttons.
2. Once the piston return to outgoing position, remove the logs.
3. Replace the log, having previously put a wooden base, as shown in the following figure.
Attention! You can seriously damage the machine by hitting the logs with a hammer.
7. CHANGE THE OIL
The oil must be changed after 150 hours of operation of the wood splitting machine.
1. Make sure that all moving parts are at rest.
2. Unscrew the plug.
3. Turn the wood splitting machine in such a way that the liquid from the oil tank is completely
drained.
4. Place the wood splitter in a vertical position for pouring oil and in a horizontal position for
draining oil.
5. Apply new hydraulic oil (use oil of the above brands). The amount of liquid must be in accordance
with the capacity of the tank (2.2 L)
6. Clean around the oil hole. To pour the oil, straighten the machine vertically, unscrew the plug,
use the level gauge to pour the required amount of hydraulic oil to the mark of the rod and tighten
the plug.