Hoover HAV-1 Use & Care Manual page 4

Using the Controls - 2 Speed Combo Models
Controls a t a glance
Dry er Exhaust tips
STEP 1
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to RESET and then
back to the desired setting.
WATER LEVEL SETTING
EX. LOW
SMALL
MEDIUM
LARGE
Note:
Items must circulate freely for best results.
3
Not es
LOAD SIZE
1/4 Full
1/4 – 1/2
1/2 – 3/4
3/4 – Full
STEP 2
Select Cycle and Water
Temperature
To select a cycle and water temperature, push the
control dial in (off position) and turn it to the right
(clockwise) until the pointer is at the number of
minutes and water temperature needed for the wash
load in the REGULAR, WRINKLE-FREE CLOTHES or
DELICATES cycles. All rinses use cold water.
REGULAR Cycle
Provides normal agitation and normal spin speeds to
wash cottons and heavily soiled items.
WRINKLE-FREE CLOTHES Cycle
Provides normal agitation speed for the first six
minutes, a pause, then slow agitation for the rest of the
wash cycle to protect wrinkle free fabrics. Spin speed
will be normal to reduce water retention.
DELICATES Cycle
Provides slow agitation speed and slow spin speed for
delicates and knits.
Note:
In wash water temperatures below 60
(16° C), detergents do not dissolve well or clean
well. Care labels define cold water as up to 85
(29° C).
° F
°
F