Assembly Instructions; Features; Control Panel - Schumacher Electric SP1297 Owner's Manual

Automatic battery charger
Table of Contents

Advertisement

Available languages

Available languages

8.3 USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension
cord, follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger, as
specified below:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge
9.

ASSEMBLY INSTRUCTIONS

9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.

10. FEATURES

1

11. CONTROL PANEL

DIGITAL DISPLAY
The digital display indicates the status of the battery and charger. See the Display
Messages section for a complete list of messages.
NOTE: During charging, the display will go into sleep mode and will not display any
messages. To turn the display back on, press the display button.
DISPLAY/ON BUTTON
The digital display will show the battery's voltage and percentage of charge.
Press the display button to show the charge progress.
25
18
4
5
3
2
8
50
100
18
16
1. AC Power cord
2. Digital display
3. Display/ON button
6
4. Charging/Charged/Maintaining
LED indicator
5. Hook attachment
6. 12V accessory plug quick-connect
7. Battery clamp quick-connect
7
8. Ring terminal quick-connect
• 8 •
150
14

Advertisement

Table of Contents
loading

Table of Contents