Page 1
MODEL: RFLMIT3 Transponder Bypass Rev.: 20100127 transponder BYPASS RFLMIT3 RF immobilizer bypass for most Mitsubishi models from 2004 & up CANADIAN VEHICLES ONLY: Dealer scan tool may be required for programming (see page 2), refer to owner’s manual or page 1.
Page 2
Ignition When the programming tool will prompt to insert the new key and turn the Jumper wire ignition ON, put the transponder part of the RFLMIT3 close to ignition and Power power-up the ignition wire with a jumper wire. Ignition...
Page 3
Turn the ignition switch OFF and remove the second key. & Security Ignition Within thirty (30) seconds, position the transponder part of the RFLMIT3 Jumper wire close to ignition and power-up the ignition wire with a jumper wire. Power The security light will stop flashing and come solid to confirm the Ignition programming.
Page 4
MODEL: RFLMIT3 Transponder Bypass Rev.: 20100127 transponder BYPASS LIMITED ONE-YEAR CONSUMER WARRANTY For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be...