Page 1
KLA SSICA CO LLE CT IO N T RIM 2 WAY WA LL MO UNT DI VE RT ER T RIM 3 WAY WA LL MO UNT DI VE RT ER ITEM NUMBER DT2-KL-TM DT2-KR-TM DT2-KT-TM DT3-KL-TM DT3-KR-TM DT3-KT-TM KLASSICA COLLECTION...
INSTALLATION INSTRUCTIONS DT2/DT3-KL, KR, KT_ _ DESCRIPTION This product is precision engineered to provide satisfactory performance provided it is installed and operated in accordance with our recommendations contained in this manual. In order to fully enjoy the comfort, safety and the reliability of your pressure balanced valve, be certain to familiarize yourself with the contents of this manual.
INSTALLATION INSTRUCTIONS DT2/DT3-KL, KR, KT _ _ FLANGE ADAPTER FLANGE WASHER HANDLE FLANGE HANDLE BELL HANDLE TRIM INSTALLATION - Place the shower plate on the all thread. - Screw the handle flange onto the handle bell and tighten it firmly. - Screw the handle bell with handle flange, washer and adapter onto the all thread and mark the position.
DT2/DT3-KL,KR, KT _ _ TEMPERATURE LIMIT STOP SET UP MECHANICAL STOP -Santec Pressure Balanced Valve has a temperature limit stop ( please see Illustration B) LIMIT STOP which once set properly can provide a safe and comfortable hot water. Below is the limit stop installation procedure: STOP POST - Remove all Handle trim parts, including the trim plate.
Page 5
To clean, wipe down with a dry soft cloth after each use. Oil-rubbed bronze should be coated with a thin layer of non-abrasive carnauba wax or liquid car wax up to 3 or 4 times per year. We recommend using SANTEC Polish which has been formulated to clean and seal, leaving behind a protective coating that will resist tarnishing and improve water repellency.
Page 6
SANTEC SANTEC res erves the right to examine any product claimed defective prior to any warranty claim being accepted or processed, state. T O O B T A I N WA R R A N T Y S E R V I C E Please read ‘WHAT IS COVERED BY OUR WARRANTY’...