FitDesk FitStudent 4100 Owner's Manual page 10

ASSEMBLY
Step 7: Using the 4mm Allen Wrench (AA)
(supplied), install two M6*12 Bolt (EE) to attach
the Storage Basket (H) to the Main Frame (F).
Figure 7
Step 8: Assembly of your new FitStudent™
Seat Height
Adjuster Knob
Figure 8
Figure 7
Storage Basket
Junior Bike Desk is complete. If necessary,
adjust the Seat to the desired height by following
the series of steps in Figure 5. If necessary, adjust
the Desktop to the desired height by following the
series of steps in Figure 6. Figure 8
Desktop
Height Adjuster Knob
9
Main Frame