Table of Contents
Advertisement
AIR FILTER
The air filter behind the air intake grille should be checked and cleaned at least once every two weeks.
HOW TO REMOVE THE FILTER
1
2
1.Grasp both ends of the air intake grille and pull to open it.
2.Hold the air filter and pull it upward. Clean the air filter.
3.When replacing the filter, make sure that the FRONT mark is facing you. Reinsert the filter into place and close the air
intake grille.
HOW TO REMOVE THE FILTER
Hold the air filter by the tab at the
top and then pull upwards. Clean the
air filter and replace it.
FILTER CLEANING
Use a vacuum cleaner to remove light dust. If there is
sticky dust on the filter, wash the filter in lukewarm, soapy
water, rinse it in clean water, and dry it.
"AIR CLEAN" FILTER (only for Floor/Ceiling models)
(ACCESSORY SUPPLIED ON REQUEST)
G The air filter is to be added by springs to the standard filter.
G It is made of two layers:
- the first layer consists in a synthetic honey comb high efficiency media to remove the dust and purifing the air.
- the second layer in charcoal media deodorizing the ambient air.
How to install the "Air clean" filter.
1. Open the unit intake air grille and pull out the standard air filter.
2. Apply on the rear side of the filter the two spings supplied with the accessory.
3. Fix the "air clean" filter by the springs.
4. Insert the two air filters one over the other and close the intake grille.
REAR SIDE OF
ANTI-MOLD FILTER
"AIR CLEAN" FILTER
(HIGH EFFICIENCY
HONEYCOMB AND
CHARCOAL MEDIA)
24
Care and Cleaning (continued)
3
SPRING
5
Advertisement
Table of Contents
