Table of Contents
Advertisement
Operation without the Remote
Control Unit
OPERATION
SELECTOR
If you have lost the remote control unit or it has trouble, follow the steps
TEST
ON
OFF
below.
1. When the air conditioner is not running
If you want to turn on the air conditioner, switch the operation selector to
the OFF position, and then to the ON position.
TIMER OPERATION
NOTE
ON
OFF
TEST
2. When the air conditioner is running
If you want to turn off the air conditioner, switch the operation selector to
the OFF position.
OPERATION
SELECTOR
Care and Cleaning
1. For safety, be sure to turn the air conditioner off and also to
disconnect the power before cleaning.
2. Do not pour water on the indoor unit to clean it. This will damage
the internal components and cause an electric shock hazard.
Clean the casing and grille of the indoor unit with a vacuum cleaner
Casing and Grille
brush, or wipe them with a clean, soft cloth.
(Indoor Unit)
If these parts are stained, use a clean cloth moistened with a mild liquid
detergent. When cleaning the grille, be careful not to force the vanes out
of place.
CAUTION
1. Never use solvents, or harsh chemicals when cleaning the indoor
unit. Do not wipe the plastic casing using very hot water.
2. Some metal edges and the fins are sharp and may cause injury if
handled improperly; be especially careful when you clean these
parts.
3. The internal coil and other components of the outdoor unit must be
cleaned every year. Consult your dealer or service center.
The set temperature and fan speed are automatically set at the
last selection before stopping.
23
Advertisement
Table of Contents
