Download Print this page

UMENA MONO12P Instructions

Monolite step light – 12v plug & play

Advertisement

Quick Links

INSTRUCTIONS
PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION OR USE
If a fitting is found to be damaged, cease use immediately.
This is a Class 3 product (Low Voltage) – no earth required.
12V TRANSFORMER MAY BE REQUIRED – sold separately
This unit must be fitted by a competent person – if in doubt consult a qualified electrician.
Install in accordance with the IEE Wiring Regulations and Building Regulations.
To prevent electrocution, switch off mains supply before installing or maintaining this
fitting. Ensure other persons cannot restore the electrical supply without your
knowledge.
This light fitting should be connected to a circuit with a 30Ma RCD fitted.
If replacing an existing fitting, make a careful note of the connections.
All connections should be made as watertight as possible to avoid electrical shortage.
When changing the bulb, always switch off at the mains & allow to cool before handling.
Always use the correct type & wattage bulb. Never exceed the wattage stated.
The unit may get warm whilst on for a period of time.
12v Lighting must be wired in parallel, not series, and cable lengths kept to a minimum.
Voltage: 12v (Low Voltage)
Max. Wattage: 30w
Bulb Holder: G4 (lamp sold separately)
IP Rating: IP54
Material: Solid Brass
Cable Length: 1.5m (VERSA Plug & Play)
Mount: Surface Mount
CLEANING:
Occasional cleaning and care are recommended for this product. Wipe with a soft, slightly damp cloth to remove any surface
dirt. Do not use abrasive cleaners or a lot of water as this could damage the fitting. Please refer to our website for more
information on the best way to clean different materials.
RETURNS:
rd
If purchased from a 3
party, please contact your supplier. If purchased direct, contact us by phone or email:
Lumena Lights Ltd, Centre 33 Long March, Daventry, NN11 4NR
Our full returns policy is available on our website.
Waste Electrical Products should not be disposed of with household waste. Please check with your local authority or contact us
for more information. Please recycle packaging whenever possible.
INSTRUCTIONS ACCURATE AT TIME OF PRINTING.
CHECK FOR UPDATES ON OUR WEBSITE.
Full product range & more information: www.lumenalights.com
Monolite Step Light – 12v Plug & Play
WARNINGS
✔✔
2 YEAR
GUARANTEE
see website for
more details
Tel: +44 1327 871161
Producer Registration Number: WEE/KC3440XY
(MONO12P)
Email: sales@lumenalights.com

Advertisement

loading

Summary of Contents for UMENA MONO12P

  • Page 1 INSTRUCTIONS Monolite Step Light – 12v Plug & Play (MONO12P) WARNINGS PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION OR USE • If a fitting is found to be damaged, cease use immediately. • This is a Class 3 product (Low Voltage) – no earth required.
  • Page 2 INSTALLATION: • Remove the front plate by a twist and pull action (anti-clockwise). • Using the pre-drilled holes in the back mounting plate, mark drill holes in the desired mounting location. Note: ensure the fitting is mounting the correct way as marked with an arrow pointing up. •...