UMENA Pathos 316 Instructions

PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION / MAINTENANCE
•
If a fitting is found to be damaged, cease use immediately.
•
This is a Class 1 product and must be earthed.
•
This unit must be fitted by a competent and qualified electrician.
•
Install in accordance with IEE wiring regulations and current Building Regulations.
•
To prevent electrocution, switch off mains supply before installing or maintaining this fitting. Ensure
other persons cannot restore the electrical supply without your knowledge.
•
This light fitting should be connected to a circuit with a 30Ma RCD fitted. Maximum 12-15 fittings on
each circuit recommended.
•
If replacing an existing fitting, make a careful note of the connections.
•
All connections should be made as watertight as possible to avoid electrical shortage.
•
When changing the bulb, always switch off at the mains & allow to cool before handling.
•
Always use the correct type & wattage bulb. Never exceed the wattage stated.
•
The unit may get warm whilst on for a period of time.
Voltage: 220 - 240v
Max. Wattage: 20w
Bulb Holder: ES / E27
Recommended Bulb: 15w LED Corn Bulb or Candle Bulb
IP Rating: IP44
Cable: 1.5mm 3 Core (H07RN-F)
Cable Length: 0.5m (approx.)
Product Heights: 0.6m / 0.8m
Materials: 316 Marine Grade Stainless Steel and Polycarbonate
Mount: Internal Mounting Base (adjustable)
Dimensions: Diameter = 100mm, Overall Height = 600mm or 800mm
INCLUDED: Bollard, 2 x Allen Keys, 3 x Mounting Screws & Plugs, 1 x Junction Box, Instructions
CLEANING / CARE OF STAINLESS STEEL:
Occasional cleaning and care is recommended for this product. Contrary to popular belief, Stainless Steel needs looking after,
especially in exposed and coastal areas. If not cleaned on a regular basis, the acid that is ever present in the air and salt in coastal
areas, will affect the surface causing pitting and even rust like staining to appear. To keep your lights looking good, simply wipe
clean the outside with a damp cloth and then dry once a month, (more frequently in coastal areas). Specialist stainless steel
cleaning products can be used but never use an abrasive cleaner. In extreme conditions it may be advisable to apply a clear
lacquer or varnish to protect the surface. Lumena recommend and stock Kilrock stainless steel cleaner.
For further information please refer to our website.
WARNING - Ensure all surfaces are completely dry prior to switching on the fitting after cleaning.
RETURNS:
If purchased from a 3 rd party, please contact your supplier. If purchased direct, contact us by phone or email:
Lumena Lights Ltd, Centre 33 Long March, Daventry, NN11 4NR
Our full returns policy is available on our website.
Waste Electrical Products should not be disposed of with household waste. Please check with your local authority or contact us
for more information. Please recycle packaging whenever possible.
Full product range & more information: www.lumenalights.com
Pathos 316 Marine Grade Stainless Steel Path Light
WARNINGS
RoHS
Tel: +44 1327 871161
Producer Registration Number: WEE/KC3440XY
INSTRUCTIONS
600mm & 800mm
✔✔✔
3 YEAR
GUARANTEE
see website for
more details
Reduced warranty for
specific components
Email: sales@lumenalights.com