Western Shelter Systems WS-D FIELD SHOWER Assembly Instructions Manual page 6

14. Attach the pump suction hose to the ¾" GHT fitting on the outside of the
basin opposite the suction strainer hose. The pump will evacuate the water
from the containment and will not be damaged if run dry.
15. Disassembling is a reverse procedure of the assembly process. A brief
overview of this process is as follows.
1. Remove stakes and tie downs
2. Remove the roof
3. Remove and fold the wall
4. Remove the plumbing manifold
5. Remove the roof assembly
6. Lay structure on the ground
7. Remove one long eave and base bar
8. Remove two short eave and base bars
9. Remove last long eave and base bars
10.
Clean and stow in field bag