Advertisement
6.
Stand the frame in the up position. Install the roof assembly by inserting the
angle corners in the pockets at the top of the leg assemblies. At this point
you can also install the (optional) clothes hook assembly. Slide it over one
of the long eave bars.
7.
Install the showerhead manifold onto the center of one of the long eave bars
with the hardware towards the inside of the shower.
8.
Attach the input hoses to the manifold.
9.
Lift frame assembly into the shower berm and place the fabric roof panel
over roof assembly without attaching to eave bar Velcro.
Advertisement
