Preference Settings - Sanyo DVP2902 User Manual

E

Preference settings

You can change the display functions. Follow steps 1 and 2 on page 16.
3
Select the desired item.
<Preference menu>
Parental Control 1 [Kid Safe]
System
Password 2 [G]
Language 3 [PG]
Default
4 [PG-13]
Audio
5 [PGR]
6 [R]
Video
7 [NC -17 ]
Preference 8 [Adult]
EN
4
Parental Control: (Default: 8[Adult])
Sets the rating level for the disc playback.
Rating settings allows you to set the rating levels of
your DVD. Playback will stop if the ratings exceed the
levels you set.
• The rating level can be changed when a password
has not been set yet for the first time use.
• If you have set a password already,
"Parental Control" cannot be selected.
Parental Control 1 [Kid Safe]
Password 2 [G]
e
Default 3 [PG]
4 [PG -13]
5 [PGR]
6 [R]
7 [NC -17 ]
ce
8 [Adult]
Password:
Sets the password for "Parental Control" and "Default"
settings.
–For the first time use.
• This number will be used as the password.
Record in case you forget it.
Parental Control
m
Password _ - - -
age
Default
ence
Enter any 4-digit number(except for 4737).
• Press cursor [o] or [p] to change the number, then
press cursor [1].
• Press cursor [0] to erase if you input the incorrect
number.
• When 4-digit numbers are entered, press [OK].
–A password has been set already. (
Parental Control
m
Password _ - - -
age
Default
ence
Enter your 4-digit password.
• Press cursor [o] or [p] to change the number, then
press cursor [1].
• When 4-digit numbers are entered, press [OK].
Default:
Reset to default setting.
• "Default" is not selected if you have set a password
already.
Restore
Parental Control
Password
e
Default
ce
– 21 –
Select the desired
rating.
is displayed.)
5
To exit the menu
Note(s):
Password:
• If you forget the
password, enter "4737"
at step 4, then enter
your new password.
• Playback will stop if the
ratings exceed the levels
you set, it will require
you to enter a password
before the disc will play
back.
• This function is available
only when is
displayed.
Default:
• When you do not
wish to initialize, press
[SETUP] to exit the
menu at step 4.