Table of Contents
Advertisement
3.4.5.3
Parallel Port Configuration
Options Summary
Use This Device
Enable or Disable this Logical Device
Possible:
Allow user to change device resource settings. New settings will be reflected on this
setup page after system restarts.
Mode
Change Parallel Port mode. Some of the Modes required a DMA resource. After Mode
changing, Reset the System to reflect actual device settings.
Chapter 3 – AMI BIOS Setup
Enabled
Disabled
Use Automatic Settings
IO=378h; IRQ=5;
IO=378h; IRQ=5,6,7,10,11,12;
IO=278h; IRQ=5,6,7,10,11,12;
IO=3BCh; IRQ=5,6,7,10,11,12;
Standard Parallel Port mode(SPP) Optimal Default, Failsafe Default
EPP Mode
ECP Mode
EPP mode & ECP mode
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
50
Advertisement
Table of Contents
