Mounting On A Table; Mounting On A Wall - LG 22LK454A Owner's Manual

Mounting on a table

(Depending on model)
y Image shown may differ from your TV.
1 Lift and tilt the TV into its upright position on a table.
- Leave a 100 mm (minimum) space from the wall for proper
ventilation.
100 mm
2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources of heat, as this may result in
fire or other damage.
y Please be sure to connect the TV to the AC/DC power adapter before
connecting the TV's power plug to a wall power outlet.
Using the kensington security system
(This feature may vary depending model)
y Image shown may differ from your TV.
The Kensington security system connector is located at the rear of
the TV. For more information of installation and using, refer to the
manual provided with the Kensington security system or visit
www.kensington.com. Connect the Kensington security system cable
between the TV and a table.
NOTE
y The Kensington security system is optional. You can obtain
additional accessories from most electronics stores.

Mounting on a wall

For proper ventilation, allow a clearance of 100 mm on each side and
from the wall. Detailed installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
100 mm
100 mm
100 mm
If you intend to mount the TV to a wall, attach Wall mounting interface
(optional parts) to the back of the TV.
When you install the TV using the wall mounting interface (optional
parts), attach it carefully so it will not drop.
1 If you use a screw longer than standard, the TV might be damaged
2 If you use an improper screw, the product might be damaged and
Separate purchase
(Wall mounting bracket)
Model
Wall mount (A x B)
Standard screw
Number of screws
http://
100 mm
100 mm
100 mm
internally.
drop from mounted position. In this case, LG Electronics is not
responsible for it.
A
B
100 mm
22/24LK454A
75 x 75
M4 x L10
4
9