Connections (Notifications) - LG 22LK454A Owner's Manual

CAUTION
y Must use the enclosed screw in the box. (Depending on model)
y Disconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
y If you install the TV on a ceiling or slanted wall, it may fall and result
in severe injury. Use an authorized LG wall mount and contact the
local dealer or qualified personnel.
y Do not overtighten the screws as this may cause damage to the TV
and void your warranty.
y Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the manufacturer's warranty.
y Screw length from outer surface of back cover should be under 8
mm.
Wall mount Pad
Back Cover
NOTE
y Use the screws that are listed on the VESA standard screw
specifications.
y The wall mount kit includes an installation manual and necessary
parts.
y The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
y The length of screws may differ depending upon the wall mount.
Make sure to use the proper length.
y For more information, refer to the instructions supplied with the
wall mount.

Connections (notifications)

Connect various external devices to the TV and switch input modes
to select an external device. For more information about an external
device's connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, camcorders or cameras and other
external devices.
NOTE
y The external device connection may differ from the model.
y Connect external devices to the TV regardless of the order of the
TV port.
y If you record a TV programme on a DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
y Refer to the external equipment's manual for operating
instructions.
10
y If you connect a gaming device to the TV, use the cable supplied
y In PC mode, there may be noise associated with the resolution,
y In PC mode, some resolution settings may not work properly
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω)
(Not Provided).
y Use a signal splitter to use more than 2 TVs.
y If the image quality is poor, install a signal amplifier properly to
Wall mount Pad
Back Cover
Standard screw
y If the image quality is poor with an antenna connected, try to
: M4 x L10
y An antenna cable and converter are not supplied.
Max. 8 mm
Adapter connection
(Depending on model)
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
y USB port supports 0.5 A electric current. If you need more electric
with the gaming device.
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
depending upon the graphics card.
NOTE
improve the image quality.
realign the antenna in the correct direction.
CAUTION
• Please be sure to connect the TV to the AC-DC power adapter
before connecting the TV's power plug to a wall power outlet.
current in case of HDD, use the separate power adaptor.