Safety - Lincoln Electric BESTER 130i-S Operator's Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Safety

This equipment must be used by qualified personnel.
maintenance and repair procedures are performed only by qualified person. Read and understand
this manual before operating this equipment. Failure to follow the instructions in this manual could
cause serious personal injury, loss of life, or damage to this equipment. Read and understand the
following explanations of the warning symbols. LE Bester Sp. z o.o. is not responsible for damages
caused by improper installation, improper care or abnormal operation.
English
WARNING: This symbol indicates that instructions must be followed to avoid
serious personal injury, loss of life, or damage to thizs equipment. Protect
yourself and others from possible serious injury or death.
READ AND UNDERSTAND INSTRUCTIONS: Read and understand this
manual before operating this equipment. Arc welding can be hazardous.
Failure to follow the instructions in this manual could cause serious personal
injury, loss of life, or damage to this equipment.
ELECTRIC SHOCK CAN KILL: Welding equipment generates high voltages.
Do not touch the electrode, work clamp, or connected work pieces when this
equipment is on. Insulate yourself from the electrode, work clamp, and
connected work pieces.
ELECTRICALLY POWERED EQUIPMENT: Turn off input power using the
disconnect switch at the fuse box before working on this equipment. Ground
this equipment in accordance with local electrical regulations.
ELECTRICALLY POWERED EQUIPMENT: Regularly inspect the input,
electrode, and work clamp cables. If any insulation damage exists replace the
cable immediately. Do not place the electrode holder directly on the welding
table or any other surface in contact with the work clamp to avoid the risk of
accidental arc ignition.
ELECTRIC AND MAGNETIC FIELDS MAY BE DANGEROUS: Electric current
flowing through any conductor creates electric and magnetic fields (EMF).
EMF fields may interfere with some pacemakers, and welders having a
pacemaker shall consult their physician before operating this equipment.
CE COMPLIANCE: This equipment complies with the European Community
Directives.
WARNING
Be sure that all installation, operation,
1
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bester 160i-stBester 200i-stK69000-2K69002-2K69005-2

Table of Contents