Page 1
9am – 5pm EST, Mon – Fri or e-mail service@peaktopgroup.com THANK YOU We appreciate the trust and confidence you have placed in PEAKTOP through the purchase of this fountain. We strive to continually create quality products designed to enhance your home. Visit us online to see our full !...
Page 2
CARTON CONTENTS Replaceable Parts (not included) Description Part no. Model no./Type Quantity Fountain top Middle Basin Fountain basin Pedestal Pump PT-707(o)MIX-UL If the above parts are missing or damaged within the warranty period, please contact Customer Service for replacement. TOOLS REQUIRED FOR ASSEMBLY: ...
Page 3
WARRANTY LIMITED WARRANTY This product is warranted to the user against missing parts, defective material and workmanship, under normal working conditions, for a period not to exceed the term noted on the chart below. This warranty period begins on the date of purchase by the original purchaser. Main body 90 days on construction, materials, paint and finish Pump...
Page 4
ASSEMBLY INSTRUCTIONS Unpack the contents of the box and check to make sure that all items are accounted for and in good condition. Select a flat, level surface for the assembly and final location of your fountain. Place the pedestal on a flat, level surface, lead the power cord through the pipe in the middle of the fountain basin and through the hole of the pedestal, make it go through the pedestal to the very bottom and pull it out through the power cord slot, align the arrow sign on both the fountain basin and the pedestal, and then twist the basin to the pedestal clockwise until the parts are secured together.
Page 5
IMPORTANT SAFETY INSTRUCTIONS FOR TRANSFORMERS When using electrical products, basic precautions should always be practiced including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Read and follow all instructions that are on the product or provided with the product. For a cord-connected or direct plug-in power unit, do not use an extension cord. Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and clearances from power and lighting conductors.
Page 6
or when a noticeable decrease in performance is detected. Failure to clean the pump will result in overheating of the pump. . 7. Before cleaning, always disconnect the pump from the power source. 8. Disassemble the pump by removing the filter and regulator/impeller plate. Remove the impeller/rotor assembly by gently pulling on the impeller blades.
Page 7
Each Peaktop Group Limited product may have variations in texture, finish and appearance from one unit to the next. This enhances the beauty of the product and makes your Peaktop Group Limited product uniquely individual. Some products and finishes are intentionally weathered or worn in appearance for aesthetic design.
Need help?
Do you have a question about the ZEN and is the answer not in the manual?
Questions and answers