Table of Contents
Advertisement
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
This setting is applicable only for the selected TV mode.
●
■
Auto Tuning using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set
Auto Tuning
with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
●
(up and down only)
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button
Manual Tuning
■
Digital TV
Normally use
Auto Tuning
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
All Digital TV channels found will be added to
●
1. Select frequency with
2. Press
OK
to search.
■
Analogue TV
Set Analogue TV channel manually after
Set
Sound System
●
Normally set
Colour System
1. Select the channel position with
2. Select the channel with
or
Update Channel List
/
and select offset with
Auto
and
Colour
System, and then perform this function.
to Auto.
Numeric
Channel Up /
Down.
- 54 -
to retune Digital TV
Channel
List.
/
.
Tuning.
buttons.
Advertisement
Table of Contents
