Table of Contents
Advertisement
3. Search with
/
4. Select
Store
with
Use
Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
Update Channel List
By updating the Digital TV channel list, you can add new channels, delete
removed channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel
List,
Child
Depending on the signal condition, the update may not work properly.
●
New Channel Message
Selects whether to give a notification message when a new Digital TV
channel is found or not.
When a notification message appears, you can perform
●
List
pressing OK.
Signal Condition
Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for Digital TV
reception.
Use the Signal Quality indicator as follows.
●
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the aerial.)
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
For Digital TV
●
Add TV Signal
Adds the TV mode.
This function is available if you skip any modes to tune in
●
first using the TV.
.
/
and press
OK
to make small adjustments to the tuning of an individual
Lock, etc.
- 55 -
to set.
Favourites
Update Channel
Auto Tuning
Edit,
for
Advertisement
Table of Contents
