Download Print this page

Advertisement

Quick Links

Parts List:
Step One: Template and Basketball Pole
4- Anchor Bolts
1- Template
8- 5/8" Zinc hex nut
4- 5/8" Locknut with nylon insert
8- 5/8" Zinc flat washers
Base pole
Pole cap
4- Rebar
Step 2: Extension Arm and Crank System
1- 1/2" x 10" bolt
2- 1/2" x 12" bolts
1- 1/2" x 4-1/2" bolt
10- 1/2" Flat washers
14- 1/2" Nylon washers
4- 1/2" Nylon lock nuts
1- Steel spacer
1- Upper extension arm
1- Lower extension arm
1- Adjustable crank
5- Height decals
Step 3: Backboard and Rim
Backboard
Goal Box (everything is included)
2- 1/2" x 4 1/2" bolts
2- 1/2" x 3 1/2" bolts
12- 1/2" Nylon washers
8- 1/2" Steel washers
4- 1/2" Nylon lock nuts
Installation Instructions
! SAFETY INSTRUCTIONS !
Failure to follow these instructions may result in injury or property
damage.
Owner must ensure that all players know and
follow these rules for safe operation of this system.
The longivity of your Basketball system depends on many
conditions such as: the location, the climate, and any exposure
to corrosives.
DO NOT HANG on the rim or any part of the system.
Do not climb, slide, shake or play on pole.
When adjusting height be careful of moving parts.
Do not allow children to move or adjust system. Adult supervision
is recommended.
Serious injury could occur during play activity if teeth/face come
in contact with backboard, net, or rim.
During play, do not wear any jewelery or objects that may get
caught in the net.
Keep pole cap on pole at all times.
If technical assistance is required please contact Douglas
Industries
To ensure safety, please follow the instructions while assembling
this system. Proper and complete assembly is essential to ensure
for the operation and safety of this system. To reduce any serious
injury this system should be properly installed, maintained, and
operated. Before beginning, please read and understand the
directions.
Suggested Tools and Materials:
2-3 people
Socket Wrenches:
9/16", 3/4", and 15/16"
Open End Wrenches:
9/16", 3/4" and 15/16"
Small phillips screw driver
Tape Measure
Shovel and post hole digger
Concrete and container mix
2- Ladders
Carpenters Level
3441 S 11th Ave., Eldridge, Ia 52748
1-800-553-8907 Fax: 1-800-443-8907
sales@douglas-sports.com douglas-sports.com
Pro-656
Douglas Industries, Inc.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Pro-656 and is the answer not in the manual?

Questions and answers

Summary of Contents for Douglas Pro-656

  • Page 1 1- Template Keep pole cap on pole at all times. 8- 5/8” Zinc hex nut If technical assistance is required please contact Douglas 4- 5/8” Locknut with nylon insert Industries 8- 5/8” Zinc flat washers Base pole...
  • Page 2 4 5/8" atwashers on top of base plate, then the 4 nylon lock nuts. H. Use level to check for proper vertical alignment, then tighten nylon lock nuts. NOTE: Nuts at the top of assembly are used for leveling the system after fully assembled. Pro-656...
  • Page 3 1/2" nylon Figure 7: Completed Step 2 1/2" lock nut 1/2" at washer 1/2" nylon steel spacer 4-1/2" bolt Figure 8: 1/2" at washer 1/2" nylon Post Lock adjustable crank optional post lock ( lock is not included) Pro-656...
  • Page 4 G. Height should now be set. Adjust if needed. Turn handle Note: Regulation rim height is 10 feet. Turn handle clockwise counter to lower clockwise to raise Pro-656...