Page 1
READING AND FOLLOWING ALL INSTRUCTIONS. BEGIN BY IDENTIFYING AND TAKING INVENTORY OF ALL PARTS USING THE PARTS LIST PROVIDED. Douglas Industries, Inc. 3441 South 11th Ave.-Eldridge, IA 52748 Telephone: 1-800-553-8907 www.douglas-sports.com Keep this instruction manual in case you have to contact the manufacturer for replacement parts.
Page 2
TOOLS AND MATERIALS REQUIRED FOR ASSEMBLY (Not Included) 1. (2) Adjustable Wrenches 10. Concrete-1/2 yard or 14-16 2. Socket Set Bags, (80 lb. bags) 3. 9/16" Wrench 11. Phillips Head Screwdriver 4. 3/4" Wrench 12. A minimum of 2 Ladders 5.
Page 3
Verify all parts listed on packing list are present prior to installation. Contact our Customer Service at 800-553-8907 for assistance with replacement of any parts missing or damaged. PARTS LIST ITEM DESCRIPTION Main Post Main Extension Arm Small Extension Arm Extension Arm Plate Backboard with frame RIM HARDWARE on page 7...
Page 4
Utility Markings Color De nition Electric Yellow Gas, Oil, Petroleum Orange Communication, Phone, TV Blue Portable Water, Irrigation One, free easy call gets your utility lines marked Green/Brown Sewer AND helps protect you from injury and expense White Proposed Dig NOTE: At rim height 10’...
Page 6
WARNING *BECAUSE OF THE SIZE AND WEIGHT OF THE SYSTEM, A MINIMUM OF THREE ADULTS ARE REQUIRED FOR THE FOLLOWING STEPS* STEP1 A. Slide a 16mm Thick Washer (U3) over each of the J-Bolts(U2) as shown in FIGURE 1A. B. Remove the Padding from Main Post (A). Place the Main Post (A) over the J-Bolts. Slide a 16mm Thick Washer(U3), a Lock washer M16 (U6) and thread a 16mm Hex Nut (U4) to each J-bolt.
Page 7
STEP 3 Attach backboard frame to Small Extension arm (C) using two M12X1.37” Hex Bolts (7), four M12 flat washer (8 ) and two M12 lock nut (9). Attach backboard frame to Main Extension arm using two M10X1.37” Hex Bolts (4), two M10 flat washer (6 ) and two M10 lock nut (5). Tight the Small Extension Arm (C) to Main Extension Arm (B) by using two M12 x 1.37”...
Page 8
STEP 4 Remove the screws on Rim spring box cover, open the Spring box. (Rim Spring Box cover may not be factory-assembled.) Slide 4 Carriage bolts M10x 4.33” (R1-rim hardware kit) thru Rim plate, Spacers and Backboard, secure with 4 Flat washers M10 (R2-Rim hardware kit ) and 4 Flange nuts M10 (R3-Rim hardware kit ) from the backside of Backboard.
Need help?
Do you have a question about the F5 FIXED Series and is the answer not in the manual?
Questions and answers