Challenge M1Q-DD7-65 Original Instructions Manual page 4

additional protection against a possible
electrical insulation failure within the
tool.
13.Always check walls, floors and ceilings
to avoid hidden power cables and pipes.
14.After long working period, external metal
parts and accessories could be hot.
15.Only withdraw the blade from the cut
when the blade has been stopped
moving.
16.The pivoting blade foot must be held
firmly against the material being cut to
reduce saw vibration, blade jumping and
blade breakage.
17.Before cutting, check the cutting line is
free of nails, screws, etc.
18.If possible, ensure the work-piece is
firmly clamped to prevent movement.
19.Never stop the cutting blade by applying
side pressure to the blade.
20.Your Jigsaw is a hand held tools, do not
clamp your Jigsaw.
WARNING: Some dust particles
created by power sawing, contain
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement
and other masonry products.
• Arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies,
depending upon how often you do this type
of work. To reduce your exposure to these
chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as those dust masks that are
specially designed to filter microscopic
particles.
4
ORIGINAL INSTRUCTIONS
SYMBOLS
HELPLINE NO 08454 505299
To reduce the risk of injury,
user must read instruction
manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Waste electrical products
should not be disposed
of with household waste.
Please recycle where facilities
exist. Check with your local
authorities or retailer for
recycling advice.