Advertisement
Factory Reset
- Factory reset of EEPROM data to default value.
Used only if the alignment have somthing wrong and need to align the TV again.
Installed channel will lost. ADC calibration no change.
Note:
After loading of a new software select " Factory reset" and check the TV alignment.
BW Expand: Black expand.
CUEC/ICP: Color Upsampling Error Correction / Inter-Chroma Processing.
FRMEC: Frame Rate Motion Error Correction.
Fleshtone Correction: Color correction.
Film Mode: Film Mode On / Off.
3:2 Film Sensitivity - 2:2 Film Sensitivity: Film Mode 3:2 (or 2:2) sensitivity setting.
Pixel/Boost : Pixel boost On / Off.
DCS: Dynamic Color Saturation.
DCTI: Digital Color Transient Improvement
Peaking: Peaking Gain setting.
Spatial Noise Filter: Spatial Noise Filtering setting.
LumaTemp Noise Filter: Luma temporal Noise filtering setting.
LAI : Low Angle Interpolation
5.2 - PW218 2nd page
Service Menu
Return
(
Video
Sound
Misc
PW218 1st page
PW218 2nd page
SAA7117AE
PW2300
Blue Cal: Blue Calibration.
BWE Enable: Black White Expansion On / Off.
BWE Mode : Black White Expansion Mode.
DYNKDEINT Enable: Dynamic Motion weighting factor for DEINTerlacer
5.3 SAA7117AE
Not used.
EFC031E - IFC130
First issue 02 / 06
BL1.41
...
Quit
...
...
Blue Cal
...
BWE Enable
...
BWE Mode
...
DYNKDEINT Enable
...
17
000
000
000
001
Advertisement
