Table of Contents
Advertisement
Basic operation
Selecting a source with remote
control
Press SRC repeatedly to select a source.
The mode switches as follows.
TUNER t DVD/CD t AUX t TUNER...
Selecting a source on the screen
You can select the source on the screen to
make it operate according to your particular
needs.
1. Turn the unit on.
2. Press OPEN/CLOSE to open the monitor.
3. Select the tuner or DVD/CD source by
pressing SRC.
4. Touch
in the left position of the
screen.
Note
Touch the screen on the AUX source.
Press SRC on the bluetooth screen and then
touch
in the left position of the screen.
5. Touch a source you want.
: Touch
when you want to
listen to the radio broadcasting.
: Touch
when you want to play
a disc.
: Touch
when you want to enter
the setup menu.
: Touch
when you want to
select a bluetooth.
: Touch
an auxiliary device.
: Touch
select a source. (The time appears
on the screen.)
If you cancel it, touch the screen.
General operations of SETUP
menu
There are three kinds of SETUP menu :
SCREEN, SOUND, DVD
1. Turn the unit on.
2. Press OPEN/CLOSE to open the monitor.
3. Select the tuner or DVD/CD source by
pressing SRC.
4. Touch
in the right position of the
screen.
The "SETUP" menu appears on the screen.
Note
Touch the screen on the AUX source.
Press SRC on the bluetooth screen and then
touch
in the left position of the screen.
5. Touch the desired option.
6. Touch the desired settings then touch
to confirm your selection. Touch
move to the "SETUP" menu.
18
when you want to play
when you don't want to
to
Advertisement
Table of Contents
