Safety note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Safety note The driver must not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident. This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, lorry or bus, check the battery voltage.
Before operarion A section whose title has one of the following symbols is applicable only to the disc represented by the symbol. Video CDs Audio CDs MP3 files WMA files DivX files DivX About the Symbol Display When you are watching a DVD and attempt to perform an operation, it may not be performed due to the programming on the disc.
Before operarion • A defective or soiled disc inserted into the unit can cause sound to drop during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. •...
Basic operation Front panel FLIP TILT DISP OPEN EJECT OPEN ARROW BAND PHONE TA/AF 15 16 1. FLIP 12. BAND Turns the LCD panel horizontal Selects the band. temporarily when the LCD panel is 13. RDS upright. • Selects the TA on/off 2.
Basic operation Remote control 4. ARROW v/V/b/B (up/down/left/right) • Selects the folders (up/down) • Selects the menus (up/down/left/right) • Skip (left/right) • Search (left/right) • Selects a preset station (up/down) ENTER Confirms menu selection. 5. 0-9 number buttons • Selects numbered items in the menu. •...
Basic operation Install the battery of remote control Pull the tray on the back of battery of remote control outward with a pencil or ball point pen and insert the battery with the plus (+) minus (-) poles pointing in the proper direction. 1 Remove the battery holder with a pencil or ball point pen.
Basic operation Connecting the system * OPTICAL OUT (Option) Main unit Power Cable (For main unit) Main unit/Hide-away unit Connecting Cable Orange Microphone DIMMER Plug To lighting switch Filter Box terminal. Black GROUND (-) To the car body. Yellow TO BATTERY (+) Microphone Fuse 5A To the car battery,...
Basic operation Yellow Blue/White TO BATTERY (+) REMOTE ON To the car battery, To the amplifier continous +12 V DC. remote on. Black GROUND (-) TO IGNITION To the car body. To the terminal from which the power is Blue supplied when the POWER ANTENNA ignition switch is set...
Basic operation REAR OUT VIDEO IN AUDIO AUX IN PRE-OUT (Rear Camera) Auxiliary Devices External Power Amplifier Camcorder Connecting the Reverse Gear If using an optional rear view camera, the reverse lead must be connected. 1. Clamp the reversing lamp lead. 2.
Basic operation Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. 1.
Basic operation Basic installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1. Remove the existing receiver unit. 2. Make the necessary connections. 3. Install the installation sleeve. 4.
Basic operation Turning the unit on ARRO Press any buttons. (Except the DISP or EJECT) Turning the unit off Press and hold the “VOL” button. Opening / Closing the LCD DISP OPEN Press the “OPEN(CLOSE)” button. The LCD panel will be opened or closed. Note The LCD panel will be closed automatically with turning the power off.
Basic operation Ejecting a disc EJECT Press the “EJECT” button. The disc is ejected from the loading slot. Note If the ejected disc is not removed in approximately 10 seconds, the disc is automatically inserted again into the loading slot. Adjusting the volume ARRO Rotate the “VOL”...
Dual mode operation Using a monitor connected to REAR OUT You can play back two different sources as a main source and a secondary source. You can listen to the main source through the speakers and to the secondary source through the monitor connected to the REAR OUT jacks.
Setup operation SETUP You can customize the various options according to your particular needs. Touch the “SETUP” button. The setup screen appears on the screen. SCREEN Language You can set the display language. Touch the language button you want. Setback You can move the LCD panel a little forward or backward.
Setup operation BG Animation You can select one of the 5 modes. It displays the change of sound output during playback. Touch the image button you want. Rear Camera • On : The rear view through the rear view camera is automatically displayed on the monitor when the rear gear is applied.
Setup operation SOUND Balance/Fader 1. Touch the “Left” or “Right” button. Adjust the balance—speaker output balance between the left and right speakers. 2. Touch the “Front” or “Rear” button. Adjust fader—speaker output balance between the front and rear speakers. Woofer Output Level Touch the b or B button to select the output level.
Setup operation Rear Speaker On : Activates the rear speaker output. Off : Cancels the function. Beep Beep Pattern • Long Key : When you press the button for a long time, a beep sound occurs. • All : When any button is pressed, a beep sound occurs. Beep Volume Adjusts the Beep Volume.
Setup operation Aspect Ratio Wide Select when your screen’s aspect ratio is fixed at 16:9 (Wide screen). Letter Box Select when your screen’s aspect ratio is fixed at 4:3 (Conventional screen). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.
Setup operation Changing the password 1. Touch the “Password” button. 2. Enter the new password with the numeric buttons 0-9. 3. Confirm the new password with the numeric buttons 0-9. 4. Touch the “Enter” button to reset the password to the newly assigned one.
Setup operation TA Mode TA Seek When the newly tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station which has the same TP information as well as the same PI as the last station. TA Alarm When a newly tuned station has no TP information for 5 seconds, a double beep sound is output.
Bluetooth operation Using a Bluetooth wireless connection. Your unit supports Bluetooth wireless connection. You can set up a wireless link with a Bluetooth phone. Starting Bluetooth on your phone. Your phone’s Bluetooth feature may be set to off by default. To use your car Bluetooth feature, Bluetooth must be turned on in your phone.
Bluetooth operation 6. In an initial connection, the user will see the "INPUT PIN CODE" screen as shown in the figure. (PIN CODE :1234) For successful connection, make sure to enter the same PIN code for Bluetooth phone and the unit. 7.
Bluetooth operation Connection through a bluetooth phone Turn on a Bluetooth phone. Refer to your phone’s user guide. 1. Press the PHONE button to select the phone. 2. Touch the button. The “SETUP” screen appears on the screen. 3. Touch the “Connect Phone” button. The “CONNECT PHONE”...
Bluetooth operation SETUP Connect Phone You can check the connected Bluetooth phone. BT Information. (Bluetooth Information) You can check the Bluetooth phone information. CONNECT PHONE Search You can search the connected Bluetooth phone. Edit You can display the “INFORMATION” screen. Pop-up screen appears on the screen.
Bluetooth operation BT Informtion (Bluetooth Information) You can check the Bluetooth phone information. Rename Renames the Bluetooth phone name. Exits the current screen. Show/Hide Selects whether bluetooth phones are able to search the unit or not. • The entered name is displayed •...
Bluetooth operation Delete All You can delete all lists. Edit You can display the “INFORMATION” screen. Pop-up screen appears on the screen. a pop-up screen containing tree buttons such as Info., Delete, and Cancel. Press the Info. button among then, and you can enter into the “INFORMATION”...
Bluetooth operation Making a call There are various ways to make calls with this unit. To make a call by entering numbers on your number buttons. 1. Enter the phone number you want to call, by touching the numeric buttons. 2.
Bluetooth operation Answering calls When you receive a call, your phone rings and display an incoming call message. 1. The “CALL FROM” screen appears on the screen. 2. Touch the “Accept” button to answer the call. If you want to reject a call, touch the “Reject” button. Notes •...
Radio (RDS) operation Listening to the radio stations BAND 1. Press the “SRC” button to select the radio. 2. Press the “BAND” repeatedly to select a band. The mode switches as follows. FM1 t FM2 t FM3 t AM (MW) 3.
Radio (RDS) operation RDS display options The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that appears when a station is first tuned. In normal RDS operation the display will indicate the station name, broadcast network or call letters.
Radio (RDS) operation TA (Traffic announcement identification) This is an ON/OFF switching signal that indicates when a traffic announcement is on air. 1. Touch the “TA” button. The “On” appears on the screen. 2. To cancel, touch it again. PTY (Program type recognition) You can select your favorite program type.
Radio (RDS) operation R-TEXT (Radio text recognition) The information of radio station is displayed on the screen. 1. Touch the “R-Text” button. Radio text appears on the screen. 2. To cancel, touch it again. Note Some RDS stations may not choose to include some of these additional features.
CD/MP3/WMA operation Playing an audio CD and MP3/WMA disc The disc is drawn in and play starts automatically. Notes • The unit can play MP3/WMA file format recordings on CD-ROM, CD-R or CD-RW (DVD-ROM, DVD-R, DVD+R, DVD-RW, DVD+RW) discs. • MP3/WMA Disc compatibility with this unit is limited as follows: 1.
CD/MP3/WMA operation Locating a folder/file using the list You can display the folder list/track list before starting to play. This is available only for 1. Touch the “LIST” button during playback. 2. Touch the folder button you want. 3. Touch the file you want, and then file will be played. •...
CD/MP3/WMA operation INFORMATION Touch the “Information” button during playback. When playing a disc containing information, you can see the CD TEXT/ID3 TAG information. In a CD TEXT, some information about the disc (disc title, performer and track title) is recorded. In a ID3 TAG, some information about the file (album title, Performer name, song title, recording year, music genre and a brief comment )is recorded.
DVD/VCD operation Playing a DVD/VCD disc The disc is drawn in, and “Disc reading” appears on the display window, and playback starts automatically. If playback does not start, press the B button. Notes • It takes several seconds for the unit to detect a disc type. •...
DVD/VCD operation Play Touch the B button to start playback. Stop Touch the x button to stop. Pause Touch the ** button during playback. To return to playback, press the B button. Skip to the next chapter/track Touch briefly the M? button to select the next chapter/track. Skip to the previous chapter/track Touch briefly the ?m button within 3 seconds of playing time.
DVD/VCD operation SEARCH Use the numeric buttons to select the chapter or title you want to view. 1. Touch the screen during playback. The setup screen displays on the screen. 2. Touch the “Search” button. The number screen displays on the screen. 3.
DVD/VCD operation REPEAT Touch the “REPEAT” button during playback. The menu item changes as follows. Off t Chapter t Title... Off t Track t All... • Chapter : Plays repeatedly the current chapter. • Title : Plays repeatedly the current title. •...
DivX operation Playing a DivX disc The disc is drawn in, and “Disc reading” appears on the display window, and playback starts automatically. If playback does not start, press the B button. Notes DivX disc compatibility with this player is limited as follows: •...
DivX operation Play Touch the B button to start playback. Stop Touch the x button to stop. Pause Touch the ** button during playback. To return playback, press the B button. Skip to the next file Touch briefly the M? button to select the next file. Skip to the previous file Touch briefly the ?m button.
DivX operation REPEAT Touch the “REPEAT” button during playback. The item changes as follows. Off t One t Folder t All... • One : Plays repeatedly the current file. • Folder : Plays repeatedly all files of the current folder. •...
Photo operation Playing photo files The Photo viewer lets you view pictures from your device. This application recognizes JPG files. The previous Image and next Image arrow keys let you display the previous or next image in the sequence of image files located in the selected folder.
USB operation Playing a USB device FLIP TILT DISP CLOSE Plug the USB device, “USB detected” appears on the EJECT ARROW BAND PHONE display window and playback starts automatically. If playback does not start, press the B button. The way to use the files recorded in a USB memory device is the same as when using a DISC.
Troubleshooting Symptom Cause Correction Leads and connectors are not Confirm once more that all Power doesn’t properly connected. connections are correct. turn on. The fuse is blown. Rectify the problem that caused The unit doesn’t operate. the fuse to blow and then replace it.
Country code list Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish...
Bluetooth phone compatibility list • If even a phone as described in this list meets requirements of Bluetooth Hand-free Profile 1.0 and Object Push Profile 1.1, it can operate. However, it is noted that this func- tion can or can not be supported according to bluetooth phone features. •...
Specifications GENERAL Output Power...................50W x 4CH (Max.) Power Source ......................DC 12V Speaker impedance......................4 Ω Ground System ...................... Negative Dimensions (W x H x D).............400 x 280 x 55 mm (Main unit) Dimensions (W x H x D) ..........256.8 x 163.8 x 40 mm (Hideaway unit) Net Weight....................2.28 kg (Main unit) Net Weight ..................1.12 kg (Hideaway unit) DISPLAY...
Support-Hotline * You can download the Update Software from http://www.lge.com/support/software.jsp for free. * You can purchase the Upgrade Map from Authorized LG Service Centres. For more information, contact Call Centre or Website. LG Subsidiary Country Service Number 902 500 234 LG Electronics ESPANA S.A.