Electrolux EDW5505EPS Installation Instructions Manual page 27

Step 4: Mounting the Custom Panel to the Dishwasher.
4.1 Align the four panel fasteners with the four holes of the keyhole slots on the inner door
panel.
4.2 Once all four fasteners are seated, slide the custom panel down until the top of the
custom panel is flush with the top of the control panel. Check overall fit and
appearance.
4.3 Open door completely and verify alignment one last time. Insert the two side screws
into the existing holes, then drive them into the two 1/8" pilot holes of the custom panel.