Operating The Product; Keys; Preparing The Machine; Programme Selection - Beko BDFN15430W User Manual

Operating the product

6-
Read "Safety Instructions" section first!
Read "Quick Quide" before this
section.

Keys

On/Off key
It is used to turn on or off the machine.
Machine will turn on with economy
programme in On mode and the number
of the economy programme will appear
on the programme indicator. In Of mode,
indicators on the display will turn off.
Start/Pause/Cancel key
It is used to startup, pause or cancel the
selected program.
Programme Selection key
It is used to select the washing
programme you determined from the
table of "Programme data and average
consumption values".
Delayed Start key
Use to set the time delay duration.

Preparing the machine

1. Open the door of the dishwasher.
2. Place the dishes in accordance with
the instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent dispenser.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
6. Close the door of the dishwasher.

Programme selection

1. Press On/Off key to turn on your
machine.
2. Refer to the table of "Programme data
and average consumption values"
32/EN
to determine a washing programme
suitable for your dishes.
3. Press Programme Selection key until
the number of the programme you
selected appears on the Programme
indicator.

Auxiliary functions

Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soiling,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
Auxiliary functions may cause changes
in the programme duration.
Some auxiliary functions cannot be
used together.
Auxiliary functions are not suitable
for all washing programmes. Indicator
of the auxiliary function that is not
compatible with the programme will not
be active.
To add auxiliary function to the
programme:
1. Select the desired washing programme
by pressing the programme selection
key.
2. In the selected washing programme, if
auxiliary function is selected, its symbol
will be displayed on the screen. If the
function key is pressed again, the
symbol will disappear and selection is
cancelled.