Related Manuals for Clarke WOODWORKER CDS1
Summary of Contents for Clarke WOODWORKER CDS1
- Page 1 DETAIL SANDER DETAIL SANDER Model: CDS1 Part No. 6462020 OPERATING & MAINTENANCE INSTRUCTIONS 0305...
- Page 2 You will note that a third value is given in the specification - the highest measured reading in a single plane. This is the maximum level of vibration measured during testing in one of the axes, and this should also be taken into account when making a risk assessment.
-
Page 3: Vibration Emissions
DESCRIPTION: DETAIL SANDER Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. Declared vibration emmission value in accordance PARTS &... -
Page 4: Safety Precautions
SAFETY PRECAUTIONS Parts Diagram WARNING: As with all machinery, there are certain hazards involved with their operation and use. Exercising respect and caution will considerably lessen the risk of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator or damage to property, may result. 1. -
Page 5: Parts List
DONOT exert pressure on the sander to stop quickly, allow it to stop normally. A wide range of accessories is available from your nearest CLARKE dealer, for further Additionally, please keep these instructions in a safe place for future reference. -
Page 6: Operation
4. Replacement fuse covers can be All bearings etc., in this tool are lubricated with a sufficient amount of high grade lubricant obtained from your local Clarke dealer or most electrical stockists. for the tools lifetime under normal operating conditions, therefore no further lubrication is required.
Need help?
Do you have a question about the WOODWORKER CDS1 and is the answer not in the manual?
Questions and answers