SCHEMATIC DIAGRAM(MAIN for CA)
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol
parts list and the schematic diagram designated components in which safety can be of special significance. When
replacing a component identified by
! ! !
resistance, wattage or voltage that are designated in the parts list in this manual. Leakage-current or resistance
measurements must be made to determine that exposed parts are acceptably insulated from the supply circuit before
returning the product to the customer.
This is a basic schematic diagram.
PRODUCT SAFETY NOTICE
, use only the replacement parts designated, or parts with the same ratings of
- 84 -
in the
! ! !
- 85 -