Hitachi R-M820AGP4MX Instruction Manual page 16

How to use the Ice Dispenser and Water Dispenser (Continued)
Filling the Water Tank
Fill the Water Tank (located in the Refrigerator Compartment) as follows.
Note: Be sure to thoroughly wash the Water Tank before use for the first time.
Filling the Water Tank
Instructions for Normal Filling
1. Push the button on the Water Tank to open
the water tank rid and fill the tank with water.
Instructions for Removing the Water Tank and Filling
1. Remove the Water Tank.
● Hold the handle and pull the Water Tank towards yourself.
3. Carry the Water Tank by the handle with care.
● When carrying the Water Tank, place one hand
below the tank for horizontal stability.
Caution
● Do not fill the Water Tank with anything other than water.
(Filling the Water Tank with fluids such as juice, sports drinks, tea, or hot water can damage your refrigerator.
The Water Tank can withstand temperatures up to 50
Mineral water
Notice
● Germs can multiply quickly when filtered water, dechlorinated water, mineral water, or boiled water is used in the Water Tank.
Be sure to thoroughly clean the Water Tank regularly.
● Change the water in the Water Tank once a week.
● When not using the Water Tank for extended periods of time, thoroughly clean and dry the water tank and reinstall it to its
place in the refrigerator.
● The capacity of the Water Tank is approx. 4 liters.
"Tank Empty" lamp
When the Water Tank becomes empty, the "Tank Empty" lamp
automatically turns on. Refill the Water Tank when this happens.
Notice
● If the Water Tank is not placed into its proper position, the "Tank Empty" lamp will turn on
even if the Water Tank is not empty. When this happens, adjust the position of the Water Tank and make sure that it is pushed all the way in.
● The lamp will temporarily turn off when the refrigerator compartment door is opened and closed, but will turn back on if the
Water Tank is still empty.
16
Close the rid to complete
the filling process.
2. Push the button on the Water Tank, open the rid and fill the
tank with water.
● Fill with water up to the "Full" line.
4. Insert the Water Tank until it passes the "Tank Position" line.
● If the Water Tank is not inserted all the way, water will not
o
C)
Filtered water
● Fill with water up to the "Full" line.
Process complete.
be supplied to the Water Dispenser or Automatic Ice Maker.
This will prevent these features from functioning properly.
Juice Isotonic
drink
"Tank Position" line
Carbonated Tea
drink
Lamp lights on.