Stop work immediately if a fault event occurs with the NBB radio control system! Please note that even small faults can lead to extensive defects. Always contact your dealer or NBB in the event of a fault. Do not attempt to repair the NBB radio system. Nameplates The nameplates specify transmitter and receiver type, serial number, frequency range and approval for non-EU countries.
Page 5
– Check regularly for worn parts. Warranty NBB grants a functional warranty of 12 months from the date of sale on all NBB radio control systems (transmitter, receiver, charger). Working hours and material costs are included in the warranty. Shipping costs shall be at the expense of the buyer. Worn parts, relays, rechargeable batteries and batteries are excluded from the warranty.
Page 6
Part 15.21 Statement Changes or modifications made to this equipment not expressly approved by NBB Controls + Components GmbH may void the FCC authorization to operate this equipment. >...
Page 7
Republic of China > Announcement No. 52, 2019 regulation It is not allowed to change the scene or conditions of use, expand the range of transmission frequency, increase the transmission power (including adding additional RF power amplifiers) or change the transmission antenna without authorization; It shall not cause harmful interference to other legitimate radio stations or stations, nor shall it propose protection against harmful interference It shall withstand interference from industrial, scientific and medical (ISM) application...
Transmitter Nano-media Technical data Nano-media combines the compact design of the Nano-minor with the technical variance of the Nano-magna – for the greatest variety of operating and feedback options in the smallest space. – Compact, ergonomic design – Also suitable for complex applications –...
Page 9
2. Slide out the 1. Press in the locking If the NBB radio control system won’t be used for a long period of time, it is strongly Please refer to the technical docu- recommended remove the battery from transmitter and charge the battery approx.
Page 10
Transmitter Nano-media Operation of the system > Switching the transmitter on and off – Unlock the emergency stop pushbutton by turning clockwise to switch on the transmitter. – Two acoustic signal sounds. – A red dot flashes in the LED display.
Page 11
SMJ Technology – Surface Mounted Joystick > Surface Mounted Joystick – Switch off the transmitter and remove the battery. – Loosen all 4 screws of the Surface Mounted Joystick with a Torx 10 screwdriver and remove the screws. – Remove the Surface Mounted Joystick from the top. Insert the new Surface Mounted Joystick and make sure that the plugs and sockets are above each other when mounting.
The nickel-metal hydride (Ni-MH) batteries from NBB have a high energy density and self- cleaning contacts. With an NBB charger, the battery packs are charged at a high charge current. This rapid charge is thermally controlled to optimise recharging and prevent overcharging.
Page 13
Alternatively the receiver (DC supply) can be equipped with an integrated charger. Quick charging (approx. 1 h): R16, R-CAN, Compact-M, Compact-V Normal charging (approx. 3 h): PNN-BUS-3 Universal charger (Webshop: https://shop.nbb.de/en-us/) NBB-No. Basic Universal-Charger (12 V/24 V DC) 2.250.1449 (without connecting cable) Universal-Charger (2.250.1449) (12 V/24 V DC)
Need help?
Do you have a question about the Nano-media and is the answer not in the manual?
Questions and answers