NBB radio control equipment. Components, etc. built into the NBB equipment for safety purposes must be regularly inspected. If the NBB radio control unit determines a fault, it must be shut down immediately. The transmitter should be switched off with the STOP key, resp. EMERGENCY STOP switch.
Page 3
The receiver is connected to the unit to be controlled with the multi-pin connecting cable supplied. Please observe the instructions issued by the manufacturer of the unit Compact-V to be controlled! We recommend urgently to realize this connection via a central, well...
4. FUNCTION CHECK To maintain operational safety, a regular function check of the NBB radio remote control is necessary. In single-shift day-to-day operation, we recommend performing this check at least once a week. Checking is possible using the display lights provided on the receiver.
NBB. NBB shall not be liable for indirect damage and reserves the right to decide on repair or re- placement. Do not attempt to continue working with a defective NBB radio remote control. Even initial- ly minor defects might be the start of a more extensive defect.
Page 6
This device is delivered and installed by the original manufacturer of the machine or delivered and installed by NBB Controls Inc, Richmond VA. It is approved by FCC to operate with the antenna originally supplied by the original manufacturer of the machine or NBB Controls, Inc, Richmond VA.