Table of Contents
Advertisement
Available languages
Available languages
Operating Instruction
General Safety Guidelines
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals can cause serious damage to health
This product is a part of high pressure system and the following safety precautions must
be followed at all time along with any other existing safety rules.
1.
Read all manuals included with this product carefully. Be thoroughly familiar with the
controls and the proper use of the equipment.
2.
Only persons well acquainted with these rules of safe operation should be allowed to
use the air tool.
3.
Do not exceed any pressure rating of any component in the system.
DO NOT exceed the maximum operating pressure of the air tool (90 PSI.)
4.
Disconnect the air tool from air supply before changing tools or attachments and
during non-operation.
5.
Always wear safety glasses and ear protection during operation.
Always wear approved safety glasses with shields.
Always wear approved hearing protection.
6.
Do not wear loose fitting clothing or apparel which contains loose straps or ties, etc.
which could become entangled in moving parts of the tool and results in serious
personal injury.
7.
Do not wear jewelry, watches, identifications, bracelets, necklace, etc. when
operating any tool, they may become caught in moving parts and result in serious
injury.
8.
Do not depress trigger when connecting the air supply hose.
9.
Always use attachments designed for use with air powered tools. Do not use
damaged or worn attachments.
DO NOT use hand tool sockets. Use approved quality sockets only.
10. Never trigger the tool when not applied to a work object. Attachments must be
securely attached. Loose attachments can cause serious injury.
11. Protect air lines from damage or puncture.
12. Never point an air tool at oneself or any other person. Serious injury could occur.
13. Check air hoses for weak or worn condition before each use. Make sure all
connections are secure.
14. Keep all nuts, bolts and screws tight and ensure equipment is in safe working
condition.
15. Do not put hands near or under moving parts.
DO NOT misuse the product, excessive exposure to vibration, work in
The air tool could explode and result in death or serious injury.
awkward position and repetitive work motion.
Advertisement
Table of Contents
