Using Power Saving Modes; Using Normal Mode; Using Standby Mode - Sony VGN-U750P VAIO Read This First Manual

Using power saving modes

When you use a battery as the source of power for your computer, you can take advantage of power management settings to conserve
battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct
power saving modes: Standby and Hibernate. When using battery power, you should be aware that the computer automatically
enters Hibernate mode when the remaining battery charge becomes short, regardless of the power management setting you select.
✍
If the battery level falls below 10 percent, you should either attach the AC adapter to recharge the battery or shut down your
computer and insert a fully charged battery.

Using Normal mode

This is the normal state of your computer when it is in use. The green power indicator light is on in this mode. To save power while
not working, you can turn off a specific device such as the LCD or the hard disk.

Using Standby mode

Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber power
light flashes in this mode.
To activate Standby mode, proceed as follows:
Press the STANDBY button or go to Start/Turn Off Computer and click Stand By.
To return to Normal mode,
❑ press the STANDBY button.
❑ press any of the Enter and cursor keys on your computer.
❑ slide the POWER switch in the direction of the arrow.
❑ press the Jog lever if the remote commander is attached.
88
Using your VAIO computer