Atx motherboard supports 22nm lga1150 intel core i7/i5/i3/ pentium and celeron cpu per intel q87, ddr3, three independent displays vga/dvi-i/hdmi/idp, dual intel gbe, usb 3.0, sata 6gb/s, audio, iris-2400 and rohs (19 pages)
Notice Handling Precautions Warning: 1. Static electricity may cause damage to the integrated circuits on the motherboard. Before handling any motherboard outside of its protective packaging, ensure that there is no static electric charge in your body. 2. There is a danger of explosion if the battery is incorrectly replaced.
VC19G/VC19E Mainboard Manual Package Checklist The mainboard This user manual One FDD cable |Software CD One ATA/100 cable I/O shielding One A73 bracket with cable (optional) NOTE: lst Utilities CD that contains patch files, onboard video/au- dio chip drivers, related online help and other useful information can be found in your mainboard package.
Page 7
Overview The VC19G/VC19E Mainboard 1 - 3...
VC19G/VC19E Mainboard Manual FIC Unique Innovation for Users (NOVUS) - Enhanced Mainboard Features and System Support NOTE: Please read Page 3-7 for detail information. WARNING: BIOS Guardian must be disabled before reflash BIOS. NOTE: Please read Page 3-7 for detail information.
Installation Procedures Chapter 2 Installation Procedures WARNING: Excessive torque may damage the mainboard. When using an electric screwdriver on the mainboard, make sure that the torque is set to the allowable range of 5.0 ~ 8.0kg/cm. Mainboard components contain very delicate Integrated Circuit (IC) chips.
VC19G/VC19E Mainboard Manual CPU Fan Installation 1). Set System Jumpers NOTE: Users are not encouraged to change the jumper settings not listed in this manual. Changing the jumper settings improperly may adversely affect system performance. 2 - 4...
Installation Procedures 2). Install Memory Modules NOTE: Usually, the DIMM3 socket is reserved. It will be used only when users install two single-bank DIMM modules on DIMM2 and DIMM3 respectively. In other words, only two types of DIMM installation are allowed: (1).
VC19G/VC19E Mainboard Manual 3). Install the CPU NOTE: Users The CPU installing procedures should be: 1. Insert the CPU (with its fansink and retention module) on the socket. 2. Connect the 20-pin plug of the power supply 3. Connect the 4-pin plug of the power supply.
Always observe static electricity precautions. Please read Handling Precautions at the start of this manual. This VC19G mainboard supports DVO/1.5V AGP 4X cards. VC19E supports 1.5V AGP 4X cards. Any other type cards may damage card and mainboard.
Page 27
Installation Procedures NOTE: If you do not use F_AUDIO, please keep the pinpair 5-6, 9-10 short as default; also, when the front headphone is plugged in, the rear audio output will be disabled. NOTE: If your mainboard has 5.1-channel audio option, use LINE_IN, LINE_OUT, MICROPHONE jacks can be the 5.1-channel audio out- put.
VC19G/VC19E Mainboard Manual Advanced BIOS Features Virus Warning CPU L1 & L2 Cache CPU Hyper-Threading Quick Power On Self Test Hard Disk Boot Priority 3 - 4...
Page 33
BIOS Setup First/Second/Third Boot Device Boot Other Device Swap Floppy Drive Boot Up Floppy Seek Boot Up Numlock Status Gate A20 Option Typematic Rate Setting Typematic Rate (Chars/Sec) 3 - 5...
Page 34
VC19G/VC19E Mainboard Manual Typematic Delay (Msec) Security Option APIC Mode MPS Version Control For OS OS Select For DRAM > 64MB HDD S.M.A.R.T. Capability Report No FDD For WIN 95 BIOS Guardian 3 - 6...
Page 35
BIOS Setup NOTE: Please disable this BIOS feature before you start to reflash BIOS. BIOS Guardian and Reflash BIOS Full Screen LOGO Show NOTE: 1. LogoGenie supports Award BIOS only. 2. If you create a Logo file (.bmp) by LogoGenie, the file size must ||||be 640 x 464 x 256 colors.
VC19G/VC19E Mainboard Manual Advanced Chipset Features 3 - 8...
Page 37
BIOS Setup DRAM Timing Selectable CAS Latency Time Active to Precharge Delay DRAM RAS# to CAS# Delay DRAM RAS# Precharge Memory Frequency For System BIOS Cacheable Video BIOS Cacheable 3 - 9...
Page 38
VC19G/VC19E Mainboard Manual Delayed Transaction Delay Prior to Thermal AGP Graphics Aperature Size (MB) for VC19G only On-Chip VGA On-Chip Frame Buffer Size Boot Display 3 - 10...
BIOS Setup Integrated Peripherals On-Chip Primary PCI IDE IDE Primary Master PIO IDE Primary Slave IDE Primary Master UDMA 3 - 11...
Page 40
VC19G/VC19E Mainboard Manual IDE Primary Slave UDMA On-Chip Secondary PCI IDE IDE Secondary Master PIO IDE Secondary Master UDMA IDE Secondary Slave UDMA USB Controller USB 2.0 Controller USB Keyboard Support AC97 Audio 3 - 12...
Page 41
BIOS Setup Onboard Lan Device Init Display First IDE HDD Block Mode POWER ON Function KB Power ON Password Hot Key power ON Onboard Serial Port 1/2 UART Mode Select 3 - 13...
Page 42
VC19G/VC19E Mainboard Manual RxD , TxD Active IR Transmission Delay IDE Secondary Slave PIO UR2 Duplex Mode Use IR Pins Onboard Parallel Port Parallel Port Mode EPP Mode Select 3 - 14...
Page 43
BIOS Setup ECP Mode Use DMA PWRON After PWR-Fail Game Port Address Midi Port Address Midi Port IRQ 3 - 15...
VC19G/VC19E Mainboard Manual Power Management Setup ACPI Function ACPI Suspend Type Run VGABIOS if S3 Resume Power Management 3 - 16...
Page 45
BIOS Setup Video Off Method Video Off In Suspend Suspend Type MODEM Use IRQ Suspend Mode HDD Power Down Soft-Off by PWR-BTTN 3 - 17...
Page 46
VC19G/VC19E Mainboard Manual CPU THRM-Throttling Wake-Up by PCI card Power On by Ring Wake Up On LAN USB KB Wake-Up From S3 Resume by Alarm Date (of Month) Alarm Time (hh:mm:ss) Alarm 3 - 18...
Page 47
BIOS Setup Primary IDE 0 Primary IDE 1 Secondary IDE 0 Secondary IDE 1 FDD, COM, LPT Port PCI PIRQ[A-D]# 3 - 19...
BIOS Setup PC Health Status CPU Warning Temperature Current System Temp. / Current CPU Temperature / Current CPU Fan Speed / Current SYS FAN Speed / Current Chip Fan Speed / CPU Vcore / +1.5V / 3.3V / +5V / +12V / -12V / -5V / VBAT(V) / 5VSB(V) Shutdown Temperature 3 - 21...
Need help?
Do you have a question about the VC19G and is the answer not in the manual?
Questions and answers