Page 1
MuLti-CyCLONiC BaGLEss VaCuuM CLEaNEr 多重離心旋風 免塵袋吸塵機 MODEL NO.: GVC2000 1800W A GILMAN GROUP BRAND...
Page 2
Please read and retain for future reference. saFEty iNstruCtiON - GENEraL • Use this appliance solely in accordance with these instructions. • This appliance is for household use only, not for commercial purpose. • Remove all packaging material from the appliance before use. •...
Page 3
saFEty iNstruCtiON - DuriNG OPEratiON • Do not pick up the appliance if falls into water. Remove the plug from the socket immediatedly. Do not use the appliance again. • Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to clean the appliance •...
PrODuCt OVErViEW 1. Unit handle 2. Dust lid 3. Dust container 4. Rear wheels left side cover 5. Hose connector 6. Hose 7. Hose handle 8. Airflow valve 9. Metal Tube 10. F loor brush 11. F loor selection button 12. O n/off switch 13. D ust container release button 14. C able rewind button 15. S peed controller 16. F loor brush holder 17. D ust mites brush 18. 2 -in-1 crevice tool 19. A ir-exhaust vents...
Page 5
assEMBLy & OPEratiNG iNstruCtiON (Pic.1) Fitting the hose to the hose connector. (Pic.1) • Rotate the hose connector into the hose inlet of the unit at clockwise direction unit it locked in position tightly. To remove the hose, rotate the connector to anti-clockwise direction, pull the connector from the hose inlet.
Page 6
Speed controller. (Pic.4) (Pic.4) • Max. speed control: roll the speed controller to upward for increasing the speed level. • Min. speed control: roll the speed controller to downward for decreasing the speed level. (Pic.5) Cable rewind button Cable rewind button (Pic.5) •...
Page 7
aCCEssOriEs 2-in-1 crevice tool (Pic.7) • A: A crevice tool with a narrow nozzle, which you can use to clean window frames, crevices, etc. • B: Push unwards the cleaning brush of 2-in-1 crevice tool, you can use to clean delicate or irregular surfaces, furniture, Venetian blinds,etc. Dust mites brush Down (Pic.8)
CLEaNiNG aND stOraGE • Remove the plug from the wall socket. • Press the rewind button and keep it pressed in; the power cord will automatically rewind to the unit. • Clean the outer surface of all parts with a damp cloth. NOtE: When the power cord is rewinded, ensure that the power cord is smoothly rewinded since otherwise the cord could become tangled or the plug could strike the back of the appliance.
Page 9
Cleaning the filters (Pic.11) Dust container lid lock • Remove the filters (A-D) from the dust container (E) as above steps. • Press the dust container lid lock to open the dust container lid. • Take the filter (B) from (A). •...
Cleaning dust mites brush Clean the brush if any waste threads or hairs got tangled in the brush. (Pic.13) Belt pulley Screw cap Roll brush • Turn the screw cap to unlock position and open the upper cover. • Remove the belt pulley from the roll brush. •...
Need help?
Do you have a question about the Gemini GVC2000 and is the answer not in the manual?
Questions and answers