Advertisement
Available languages
Available languages
8
10
7
by pressing the + or - buttons. Your DUET has five
output levels that are displayed by 1 (the lowest
output) through 5 (the highest output).
65%. Your mist output will pause when the set
humidity level is reached, and will resume when
the humidity dips below your setting. When set to
65%, your unit will run continuously.
hours. The clock icon will show on the display
9
when the timer is on. Turn the timer off by pressing
the timer button again until it reaches 0.
11
It will take the DUET a few minutes to reach the
warm mist temperature.
lighting plus the nightlight, the nightlight only, or no
lights (all of your settings will remain set).
Note: The DUET is an ultrasonic humidifier, so it emits a very fine
mist. Position the nozzle to direct this mist away from furnishings
and electronics.
That's it! Your DUET is ready to use.
7
Plug in your unit and press the power
button power-of . Set your desired output level
8
Press the humidity control button
set your humidity level from 25% to
9
Press the timer button clock to run your
DUET for a set period of 2, 4, 8, or 12
10
Switch between cool and warm mist by
pressing the mist temperature button .
11
Press the light mode button
between the screen lighting, the screen
to
to select
Advertisement
