Subscribe to Our Youtube Channel
Related Manuals for Direct IP Idis DR-6100P Series
Summary of Contents for Direct IP Idis DR-6100P Series
- Page 1 Network Video Recorder Quick Guide DR-6100P Series DR-4100P Series DR-6200P Series DR-4200P Series Powered by...
-
Page 2: Safety Precautions
Safety Precautions Important Safeguards 14. Damage requiring Service Unplug this equipment from the wall outlet and refer servicing to qualified 1. Read Instructions service personnel under the following conditions: All the safety and operating instructions should be read before the A. -
Page 3: Fcc Compliance Statement
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"... -
Page 4: Front Panel
Accessories Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included. Item Network Video Recorder Power Cable Quick Guide Manual and IDIS Center Program CD Optical USB Mouse IR Remote Control Assembly Screws for Adding Hard Disk Drives Rack-mount Kit SATA2 Cables Overview... -
Page 5: Audio Ports
<DR-4100P Series, DR-4200P Series> CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. CAUTION DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK REFER SERVICING TO QUALIFIED DO NOT OPEN SERVICE PERSONNEL. VIDEO IN VIDEO IN / PoE 100-240V~ Ext. -
Page 6: Remote Control
Remote Control ID Button Panic Button Camera Buttons Status Button Layout Button PTZ Control Buttons Register Mode Button Thumbnail Button Calendar Button Keylock Button Setup Button Freeze Button Log Button Enter Button Arrow Buttons Alarm Button Sequence Button Zoom Button &... -
Page 7: Network Setup Wizard
Camera Registration Network Setup Wizard Once Network Setup Wizard is complete, the system will After exiting from Quick Wizard, the network with automatically enter Camera Registration mode and scan for Network Wizard will start automatically. cameras connected to the NVR. ●... -
Page 8: Apply/Cancel Buttons
- Mode: Select the scan mode. Apply/Cancel Buttons - Advanced Setup: If the camera is networked but not scanned, use this setup. This setup allows you to While in Camera Registration mode, select Apply to register change the network setting of the NVR’s VIDEO IN all changes. -
Page 9: Basic Feature
• There is no default password for the admin Basic Feature account. Select "admin" and then "OK" without entering a password to log in. • Leaving the admin account unassigned with a password poses a security risk. Please assign Live Mode a password at your earliest convenience. -
Page 10: Video Recording & Playback
Video Recording Playback Setup IDIS Web You can play back video recordings by using a mouse or Launch Internet Explorer and then enter the following remote control. information in the address bar. – http://IP Address:Port Number (NVR system’s IP All Channel Playback address and IDIS Web port number configured under Network >... -
Page 11: System Requirements
IDIS Center Program Installation Prior to installing the software, click on to the Windows Start menu, open Control Panel, click on Power System Requirements Management, and set options for Turn off monitor and Turn off hard disks as Never. Recommended Minimum Please enter the software installation CD into the PC. -
Page 12: Device Registration
Login Device Registration This program does not have a password set by default. To use the functions provided by IDIS Center, you must first Leaving the admin account unassigned with a password register a device and add the device to a device group. poses a security risk. -
Page 13: Live Video Mode
Live Video Mode When user authentication window appears, enter the User ID and Password set up on each device, and then select OK for remote access. In the Site List, make sure that the device has been added to the device group. In the panel tabs, click the Live tab. -
Page 14: Ios Device
IDIS Mobile – Address, Monitoring Port, Search Port, Audio Port: Enter the device name used to register the device to FEN. If FEN feature is not enabled on the device, deselect FEN checkbox and enter the This service requires heavy data traffic, and using a Wi-Fi connection is recommended. -
Page 15: Specifications
Specifications 4 TTL, NC/NO programmable, 2.4V (NC) or Alarm In These product specifications may change without prior 0.3V (NO) threshold, 5VDC notice. 1 relay output, NC/NO, 2A@125VAC, Alarm Out 1A@30VDC General Alarm Reset In 1 TTL, terminal block Exterior Dimensions Internal Buzzer 78dB at 10cm 430mm x 88mm x 411mm... - Page 16 IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...
Need help?
Do you have a question about the Idis DR-6100P Series and is the answer not in the manual?
Questions and answers