Installation - HAMPTON BAY HB8822LED-05 Use And Care Manual

Installation

1
Mounting the hardware

Thread the fixture mounting screws (FF)
into the provided holes of the mounting
bracket (GG).

Thread the hex nuts (BB) onto the fixture
mounting screws (FF). Do not tighten the
hex nuts (BB) at this time.

Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the bracket
mounting screws (EE).

Place the fixture pan (C) over the outlet
box and onto the fixture mounting screws
(FF).

Adjust the fixture mounting screws (FF)
until they protrude out from the fixture pan
(C) 1/4 in.

Remove the fixture pan (C) and secure the
position of the fixture mounting screws (FF)
by tightening the hex nuts (BB) against the
mounting bracket (GG).
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.

Connect the black supply wire to the black
fixture wire using a wire nut (DD).

Connect the white supply wire to the white
fixture wire using a wire nut (DD).

Connect the fixture ground wire to the
supply ground wire using a wire nut (DD).

Wrap all wire connections with electrical
tape for a more secure connection.

Carefully tuck the wires and wire nuts (DD)
into the outlet box.
EE
FF
BB
5
Please contact 1-855-HD-HAMPTON for further assistance.
GG
GG
C
DD
HAMPTONBAY.COM