Driver Replacement; Fcc Notice; Troubleshooting - HAMPTON BAY HB8822LED-05 Use And Care Manual

Driver Replacement

This product is ENERGY STAR ® listed. The driver can be replaced without having to cut wires.
Please contact a qualified electrician if driver replacement is needed.

FCC Notice

NOTICE: This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there is no guarantee
that interference can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interface by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.

Troubleshooting

Problem
The light will not turn on.
The fuse blows or circuit breaker trips
when light is turned on.
Solution
 Make sure the power supply is on.
 Test or replace the switch.
 Check the wiring.
 Replace the driver.
 Check the wire connections.
7
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM